Skip to main content

MRI Safety: Level 2 MR Personnel

In-depth MRI safety for MR technologists, MR radiologists, MR nurses and anesthesia staff with screening duties, and MR Safety Officer candidates, based on the ACR Manual on MR Safety. About 60 minutes. English.

Course Description

MRI safety training for Level 2 MR Personnel: MR technologists and MR radiologists, who must be Level 2, MR nurses and anesthesia staff with screening responsibilities, and candidates for MR Safety Officer. It is built on the ACR Manual on MR Safety and covers every Level 2 topic in the manual's Table 1. Level 2 personnel control access to Zone III and decide whether a patient or object may cross into Zone IV.

The video runs about 60 minutes. It opens with guidance versus regulation, what Level 2 adds, and why MR accidents happen. It covers the three fields and the IEC and FDA operating modes, the four-zone model, Zone IV door practices, the 9 gauss line and fringe fields beyond the room, and the cryogen venting zone. It then sets out the duties of the MR Medical Director, MR Safety Officer and MR Safety Expert, policies, annual training, supervising non-MR personnel, and staffing minimums for routine, emergent, research and remote scanning. The physics section explains the spatial field gradient, torque versus translational force, the Lenz effect, and static field effects on people. Screening follows: forms, a multitiered program, conscious, pediatric, unconscious and emergent patients, companions and service animals, staff screening, ferromagnetic detection, final determination, implant documentation, and foreign bodies.

Next come patient preparation, the routine and augmented full stop and final check, and communicating with the patient. On labeling, it covers what MR Conditional really promises, why conditions do not transfer across field strengths, active implanted and on-planted devices, what to do when the manufacturer gives no assurance, and testing, labeling and tethering portable equipment. The RF section covers SAR and operating modes, why SAR limits do not prevent burns, the three burn mechanisms, padding, leads and coils, clothing and tattoos, and monitoring. It then covers peripheral nerve stimulation, acoustic noise, induced voltages and contrast. Emergencies include when to quench, venting failure, safety switches, codes, fire, entrapment and drills. It closes with special patient groups, alternative environments, event reporting, your supervisory role, and three cases.

The course runs video, post-test, then certificate. The post-test unlocks after the full video has been watched and requires 80% to pass. Passing earns a DRPS Academy certificate of completion.

Watching does not make you Level 2; your facility's MR Medical Director defines the training and designates personnel. Your employer must add site orientation, contacts, observed competency, drills, annual renewal and records. MR safety training follows ACR guidance and accreditation programs, not a dedicated federal MR rule. This is not accredited CE.

Learning Objectives

  • Explain translational force, torque and Lenz effects
  • Run screening and the full stop and final check before Zone IV
  • Apply MR Conditional labeling to implants and devices
  • Prevent RF burns and manage SAR operating modes
  • Decide correctly between quench and other emergency controls
  • Supervise Level 1 and non-MR personnel in Zone III
  • Report MR safety events and near misses to the MR Medical Director

Course Modules

Training Video

Narrated video training in English

Duration: about 60 minutes

Post-Test

Unlocks after the full video is watched; 80% to pass, 3 attempts

Certificate of Completion

Issued on passing the post-test

Buy Seats

$45 per seat. Buy for yourself or your whole team; each learner gets their own login.

Already purchased? Go to the course →