Skip to main content

MRI Safety: Level 1 and MRI Awareness

MRI safety for Level 1 MR Personnel and for non-MR staff who work near an MRI department, such as front desk, transport, EVS, security and facilities, based on the ACR Manual on MR Safety. About 21 minutes. English.

Course Description

MRI safety training for two groups: staff whom the MR Medical Director (MRMD) has designated as Level 1 MR Personnel, such as patient aides, technologist assistants and some nursing roles, and everyone else whose work brings them near an MRI department. That includes front desk and scheduling staff, patient transport, environmental services, security, facilities and maintenance, and nurses and physicians who accompany patients. It is built on the ACR Manual on MR Safety. MR technologists, MR radiologists and others with screening duties need the separate Level 2 course.

The video runs about 21 minutes. It starts with the three fields, static, radiofrequency and gradient, and the kinds of risk each brings, then real injuries: deaths from oxygen cylinder projectiles and a firearm discharge, and burns as the most frequently reported MRI injury. It explains why the magnet is always on and what can become a projectile. It then covers the four-zone model, Zones I and II, controlled access in Zone III, the Zone IV scanner room and its door, the cryogen venting zone, and the 9 gauss (0.9 mT) line and how the field can reach equipment rooms and floors above and below. You learn doorway vigilance, the difference between Level 1, Level 2 and non-MR Personnel, what Level 1 really means, and the rules for non-MR staff inside Zone III or IV.

The middle of the course covers why screening comes first, screening yourself and reporting your own implants and symptoms, attire, pockets and phones, and which equipment stays out. It explains the MR Safe, MR Conditional and MR Unsafe labels from the FDA's 2023 labeling guidance and ASTM F2503, and how to secure MR Unsafe equipment in Zone III. Emergencies follow: entrapment and when to quench, a medical code, fire, the three safety switches, and cryogen and quench safety. It ends with who to call (MRMD, MRSO, MRSE), reporting events and near misses, alternative MR environments, and quick rules by job.

The course runs video, post-test, then certificate. The post-test unlocks after the full video has been watched and requires 80% to pass. Passing earns a DRPS Academy certificate of completion.

Watching does not make you Level 1. Your facility's MRMD defines the training and designates who is Level 1, and staff without that training in the past 12 months count as non-MR Personnel. Your site must add its own orientation, procedures, contacts and a competency check. MR safety training follows ACR guidance and accreditation programs, not a dedicated federal MR rule. This is not accredited CE.

Learning Objectives

  • Explain why the magnet is always on and what can become a projectile
  • Describe Zones I–IV and the 9-gauss line
  • Screen yourself and keep unverified equipment out
  • Read MR Safe, MR Conditional and MR Unsafe labels
  • Respond correctly to a code, fire or entrapment
  • Know what the three safety switches do and how to respond to a cryogen release
  • Report safety events and near misses

Course Modules

Training Video

Narrated video training in English

Duration: about 21 minutes

Post-Test

Unlocks after the full video is watched; 80% to pass, 3 attempts

Certificate of Completion

Issued on passing the post-test

Buy Seats

$45 per seat. Buy for yourself or your whole team; each learner gets their own login.

Already purchased? Go to the course →